Murphy CANdrive Module CDV300R Dokumentacja Pobierz pdf (Strona 9)

Section 78 00-02-0618

10-24-07 - 5 -

Panel Mounting

WARNING: Do not install the CANdrive module near exhaust manifolds,

turbochargers or other engine locations that might exceed the

maximum allowable operating temperature of 185°F (85°C).

CANdrive modules are surface-mounted with four no. 4 screws, fixing center dimensions as

shown. Select screw length according to panel thickness, ensuring a maximum of 1/2 inch

(13mm) screw depth into the CANdrive module fixing holes.

Model CDV100F, with forward facing connector, is designed for surface-mounting inside an

enclosed panel.

Model CDV300F, with additional LEDs and rearward facing connector, is designed for front-of-

panel mounting: these modules require an additional 2.4” x 1.6” (60 x 40mm) cut-out for rear

access to connector and switches. The CDV300F includes a CDVG gasket (fitted into a well

behind the rim of the case) to provide front environmental sealing to IP65.

Before mounting, ensure that the final position allows access for:

• Connection of the included wire harness.

• Configuration of switches 1 - 5. Alternatively, set thee switches before mounting. See

Configuration section for full details.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Murphy CANdrive Module CDV300R Dokumentacja Strona 9